Allow Usb File Transfer Android

To start with, we need to plug the USB cable to the computer you wanted to access the files. We can see that there will not be any indication regarding any changes or notifications in your android device. After plugging USB cable to computer verify that the computer is recognized your device. What i did to transfer files from 'redmi 4' to 'mac' was following: Install android transfer software on mac. Go to 'developers-option' in your phone to do so follow below steps: 2.1 go to 'about-phone' in settings 2.2 click on the 'mi-version' 8 times to enable developers mode. Now select 'developers options' in settings. Open the Android settings and then the 'Developer Options' (Activate them if not done) 2. Scroll down and select 'USB Configuration' 3. The setting should currently be set to 'No data transfer,' however, you'll want to enable the 'File transfer' or 'Transferring files' option. After you do this, you can exit your settings page and connect the phone to your computer. Once the USB connection has been made, it should pop up in file transfer mode automatically.

Android Usb Mode
Android 8 Usb File Transfer

For all those who has recently purchased an Android smart phone and would like to know on how you can enable the USB storage right on your Android device then we will help you to do the same which we will see in the due course of this article. Please note that we will be seeing on how you can do the same in the Samsung Galaxy S2 GT I9100 and will be similar for all other Android devices too. We at androidadvices ensure that every single thing is being covered and if you feel that anything is left out then you can always make sue of Comments section to express your thoughts on the same as we will ensure that we will try to covert eh same on this site.

Please note that this process is one of the simple process and doesn't require you to either download any special application or even need to tweak your Phone to do the same. All you need to do is to just follow the simple and easy to understand instructions along with the screen shots which will guide you on how you can Enable USB Storage on your Android Device.

Procedure to Enable USB Storage on Android Devices:

First up from your Home screen of your phone you will have to click on the 'Applications' and once you get into the same you need to find an option called 'Settings', select the same as shown in the below screen shot.

Once you get into the Settings, you will now have to tap on the option of 'Wireless and Network' as shown in the below screen shot for your convenience.

Next up in the Wireless and Networks, you will find many options like Wi Fi Direct Settings, KIES via Wi Fi, Bluetooth Settings, Tethering, VPN Settings etc. All you need to choose is the 'USB Utilities' option.

Now, up next click on the tab which is 'Connect Storage to PC' after which it will prompt you to attach the USB chord connecting to the computer and phone which you can see in the below screen shot,

After this you will see a green robot showing the USB symbol along with an option of 'Connect USB Storage'. Tap or select the same and then that's it as this will connect the phone with the computer in the USB Mode turned ON.

So that's it in this way you have now successfully enabled the USB Storage on your Android Device. Just in case if you were unable to enable the same do let us know as we will guide you to enable the same which is the unlikely case with most of the users. Last but not the least the biggest advantage is that you can use this just like a USB drive so as to accommodate all your data within the phone upon connecting with the USB cable and also most importantly this also allows you to explore the same as a physical drive which allows you to drag and drop the contents to / from the device.

With the latest Android OS coming out, i.e. the Android Jelly Bean and Android 4.4 KitKat, you would be seeing even better options, and usually the smartphone comes with options for sending a software to the computer to install the drivers of the Android phone, before you could access the USB storage of the Android phone.

In order to get more access from your Android device and fully control the device, you need to open USB debugging on the device first. Then how to enable USB debugging on Android phone? Here is a detailed tutorial for you.

Turn on USB Debugging on Different Android Phones

It is certain that the steps to open USB debugging on different Android devices is not exactly the same. So we have listed the methods to enable USB debugging on some special Android devices below. If your device is one of them, just click to get the more detailed tutorial.

Enable USB Debugging Based on Android OS Version

Normally, the methods to enable USB debugging on the mobile phones running on the same Android OS version are similar. Hence, you can also select to enable the USB debugging based on the OS version of your device.

Step 1. Check the Android OS Version of Your Device

The first step is to ensure the OS version of your Android device. Just navigate to 'Settings > About device/phone > (Software info/information) > Android version' to have a check. Then you can turn on the USB debugging based on the Android version.

Step 2. Enable USB Debugging on Your Android Phone

The methods to open USB debugging on different Android versions are disparate:

1) For Android OS 6.0 or above

- Go to 'Settings' and choose 'About device/phone' in the section.

- Tap on 'Software info/information' and tap the option 'Build number' for 7 times in rapid succession. Then you should go back to the 'Settings'.

Android Usb Mode

- Next, you need to find out the 'Developer options' and tap on it. Then you need to turn on the 'Developer options' and 'USB debugging'.

- Now you need to 'Select USB Configuration' and choose the 'MTP (Media Transfer Protocol)' option. If the 'MTP' option does not work, please try the 'RNDIS (USB Ethernet)', 'Audio Source' or 'MIDI' option.

2） For Android 4.2 - 5.0

- Tap on 'Settings' and then go to 'About device/phone' and tap 'Build number' for 7 times in rapid succession. Next, you need to go back to the 'Settings'.

- Now find and tap the 'Developer options' and then go on to toggle on the buttons next to 'Developer options' and 'USB debugging'.

3) For Android 3.0 - 4.1

- Enter the 'Settings' on your Android phone.

- Click on 'Developer options' under the section and turn on the 'USB debugging' mode.

4) For Android 2.1 - 2.3

- Tap on 'Settings' and go on to choose 'Applications'.

- Then you need to click the 'Development' option and turn on the 'USB debugging' mode.

Ask Our Support Team for Help

If you fail to open the USB debugging by using the methods above, or if the detection still failed with the USB debugging enabled, please contact us via email: support@mobikin.com with the following contents:

- The brand and model of your Android phone;

- The OS version of your device.

For other problems about the software installation, connection or use, please search for the solutions on the Product FAQ page.

Android 8 Usb File Transfer

Connect with Droid Transfer via USB

To connect your Android device using USB, there are a few more steps to take than when you connect using WiFi. However, if your WiFi connection is shaky, data transfer may be slow or even freeze. If this is the case, or if you have a large number of files or messages you wish to transfer, we would recommend using a USB cable instead.

Firstly, please ensure that you have downloaded both Droid Transfer on your PC and the Transfer companion app on your phone, as both are needed to allow your PC and your Android phone to communicate with each other:

PC: Android:

Your Android phone does not need to be rooted for Droid Transfer to connect your device. You do however need to Enable Developer Mode and USB Debugging on your phone. Don't worry, you don't need to be planning to develop an Android game to turn on Developer Mode and debugging and there is no cost or consequence for turning this on, except for another menu being added on your phone.

Please use the list below to skip to each option:

Enable Developer Mode

On your Android device, find and open Settings from the main menu.
In Settings, tap 'About phone / About Device / About'.
Now for the odd part, but bear with me..
Scroll down to 'Build Number / Build Version', and tap it 5 or 6 times. Your device will let you know how many taps are remaining.
Developer Mode is now enabled, and you don't have to repeat this process again unless you perform a factory reset. How does it feel to be a developer?

Enable USB Debugging

Now that you are a developer, you can enable USB Debugging. This is required in order to let you move files between your Android and PC using Droid Transfer.

On your Android device, again open Settings.
Scroll down to the new option 'Developer Options', and tap to open.
Ensure that 'Developer Options' is ON.
Also ensure that the 'USB Debugging' option is enabled.
You may get prompted to confirm this change. If you receive this pop-up, please tap 'OK / Apply'.

Connecting your phone and PC with Droid Transfer

Now that you have completed the setup for USB transfer, you can run your Droid Transfer app!

Launch Droid Transfer from your PC's Desktop.
When you see the Welcome screen, please connect your Android device to the PC using your USB cable.
Your phone may prompt you to allow permissions with this computer. If this is the case, tap 'OK / Allow'.
Your device may also ask what function you would like to do with the computer (Charging Only, File Transfer, etc..). We would like to transfer files, so select that option and confirm.
Once the permissions are given, Droid Transfer will connect to your Android device, and automatically open the Transfer Companion on it.

Eureka! Your Android phone is now connected to Droid Transfer on your PC. You can now transfer media between your Android and computer.

Troubleshooting USB Connection

Please see the steps provided in the USB Connection Troubleshooting guide with tips on what to do if you're struggling to connect your phone and your PC and how to ensure that a stable connection is maintained.

Is it possible to run osx on a pc. If neither a Wi-Fi or a USB connection is working for you, this might be a Windows Firewall configuration error. Please see our instructions on how to configure Windows Firewall to allow Droid Transfer to connect to your phone.